CyberVision64/3D Monitor displays only the bootlogo or stays black Type of Failure: After booting the screen keeps displaying the bootlogo (black screen with colorfull text display) or plain black thou the monitor is connected to the proper output. Cause: The "Screenmode" on the workbench has not been set to the CyberVision64/3D and is still displaying the original screenmode on the 23-pin amiga video output. These screenmodes can not be displayed by the CyberVision64/3D. This may result in the earlier described failiuretype. Another possible cause may be a not properly connected scandoubler or cable between the CyberVision64/3D and the scandoubler. Solution: Set the "Screenmode" of the workbench to the resolutions of the CyberVision64/3D. While using the scandoubler, please make sure that the scandoubler is properly connected to the CyberVision64/3D and that the cable connection between the two cards is also properly mounted. Correct this if neccesary.